Nanometric Cu-ZnO Particles Supported on N-Doped Graphitic Carbon as Catalysts for the Selective CO2 Hydrogenation to Methanol.

The quest for efficient catalysts based on abundant elements that can promote the selective CO2 hydrogenation to green methanol still continues. Most of the reported catalysts are based on Cu/ZnO supported in inorganic oxides, with not much progress with respect to the benchmark Cu/ZnO/Al2O3 catalyst. The use of carbon supports for Cu/ZnO particles is much less explored in spite of the favorable strong metal support interaction that these doped carbons can establish. This manuscript reports the preparation of a series of Cu-ZnO@(N)C samples consisting of Cu/ZnO particles embedded within a N-doped graphitic carbon with a wide range of Cu/Zn atomic ratio. The preparation procedure relies on the transformation of chitosan, a biomass waste, into N-doped graphitic carbon by pyrolysis, which establishes a strong interaction with Cu nanoparticles (NPs) formed simultaneously by Cu2+ salt reduction during the graphitization. Zn2+ ions are subsequently added to the Cu-graphene material by impregnation. All the Cu/ZnO@(N)C samples promote methanol formation in the CO2 hydrogenation at temperatures from 200 to 300 °C, with the temperature increasing CO2 conversion and decreasing methanol selectivity. The best performing Cu-ZnO@(N)C sample achieves at 300 °C a CO2 conversion of 23% and a methanol selectivity of 21% that is among the highest reported, particularly for a carbon-based support. DFT calculations indicate the role of pyridinic N doping atoms stabilizing the Cu/ZnO NPs and supporting the formate pathway as the most likely reaction mechanism.

Hydrothermal Aging Enhances Nitrogen Oxide Reduction over Iron-Exchanged Zeolites at 150 °C.

Ammonia selective catalytic reduction (NH3-SCR) over copper- and iron-exchanged zeolites is a state-of-the-art technology for removal of nitrogen oxides (NOx, NO, and NO2) from exhaust emissions but suffers from poor low-temperature (i.e., 150 °C) activity. Here we show that hydrothermal aging of Fe-beta, Fe-ZSM-5, and Fe-ferrierite at 650 °C or higher leads to a remarkable increase in NOx conversion from ∼30 to ∼80% under fast NH3-SCR conditions at 150 °C. The practical relevance of this finding becomes more evident as an aged Fe-beta/fresh Cu-SSZ-13 composite catalyst exhibits ∼90% conversion. We propose that a neutral heteronuclear bis-µ-oxo ironaluminum dimer might be created within iron zeolites during hydrothermal aging and catalyze ammonium nitrate reduction by NO at 150 °C. Density functional theory calculations reveal that the activation free energy (125 versus 147 kJ mol-1) for the reaction of NO with adsorbed NO3- species, the rate-determining step of ammonium nitrate reduction, is considerably lower on the bis-µ-oxo ironaluminum site than on the well-known mononuclear iron-oxo cation site, thus greatly enhancing the overall SCR activity.

Drug screening of α-amylase inhibitors as candidates for treating diabetes.

In the present study, the identification of potential α-amylase inhibitors is explored as a potential strategy for treating type-2 diabetes mellitus. A computationally driven approach using molecular docking was employed to search for new α-amylase inhibitors. The interactions of potential drugs with the enzyme's active site were investigated and compared with the contacts established by acarbose (a reference drug for α-amylase inhibition) in the crystallographic structure 1B2Y. For this active site characterization, both molecular docking and molecular dynamics simulations were performed, and the residues involved in the α-amylase-acarbose complex were considered to analyse the potential drug's interaction with the enzyme. Two potential α-amylase inhibitors (AN-153I105594 and AN-153I104845) have been selected following this computational strategy. Both compounds established a large number of interactions with key binding site α-amylase amino acids and obtained a comparable docking score concerning the reference drug (acarbose). Aiming to further analyse candidates' properties, their ADME (absorption, distribution, metabolism, excretion) parameters, druglikeness, organ toxicity, toxicological endpoints and median lethal dose (LD50 ) were estimated. Overall estimations are promising for both candidates, and in silico toxicity predictions suggest that a low toxicity should be expected.

Light-activated controlled release of camptothecin by engineering porous materials: the ship in a bottle concept in drug delivery.

Many systems for controlled drug release have been developed using different types of nanoparticles modified with azobenzene moieties. In these systems, drug release is often triggered by UV irradiation (either direct or using a near-infrared photosensitizer). These drug delivery systems often face challenges to their use, such as their lack of stability in physiological environments and concerns about their toxicity and bioavailability, that have hindered their translation from pre-clinical studies to clinical trials. Here, we propose a conceptual change by shifting photoswitching activity from the vehicle (nanoparticle) to the load (drug). In this "ship in a bottle" concept, the molecule to be delivered is trapped within a porous nanoparticle and its release is accomplished through a photoisomerization process. Using molecular dynamics, we designed and synthesized a photoswitchable prodrug of the antitumor drug camptothecin that contains an azobenzene functionality, and we have prepared porous silica nanoparticles with pore diameters designed to limit its release when in the trans form. Molecular modelling was used to show that the cis isomer was smaller and better able to pass through the pores than the trans isomer, which was confirmed by stochastic optical reconstruction microscopy (STORM). Thus, prodrug-loaded nanoparticles were prepared by loading the cis prodrug and then using UV irradiation to convert cis to trans isomers, trapping them, within the pores. Release of the prodrug was then accomplished by using a different UV wavelength to convert trans isomers back to cis. In this way, prodrug encapsulation and release could be achieved "on demand" through controlled cis-trans photoisomerization, which allowed the prodrug to be delivered safely and its release to be triggered precisely at the region of interest. Finally, the intracellular release and cytotoxic activity of this novel drug delivery system has been validated in several human cell lines, confirming the ability of this system to accurately control the release of the camptothecin prodrug.

Healing double vacancy defects on graphene: reconstruction by C2 adsorption.

Graphene has emerged as an exciting material because of its widespread applications resulting from its unique properties. Nano-scale engineering of graphene's structure is one of the most active research areas aimed at introducing functionalities to improve the performance or endow the graphene lattice with novel properties. In this regard, conversion between the hexagon and non-hexagon rings becomes an exciting tool to tune the electronic structure of graphene due to the distinct electronic structure and functionalities induced in graphene by each type of ring. This Density Functional Theory (DFT) study is an in-depth look at the adsorption-induced conversion of pentagon-octagon-pentagon rings to hexagon rings, and systematically investigates the possibility of the conversion of pentagon-octagon-pentagon rings to pentagon-heptagon pair rings. Moreover, the bottlenecks for these atomic-level conversions in the lattice structure of graphene and the influence of heteroatom doping on the mechanisms of these transformations are established.

Enhanced Fatty Acid Photodecarboxylation over Bimetallic Au-Pd Core-Shell Nanoparticles Deposited on TiO2.

Photodecarboxylation of biomass-derived fatty acids to alkanes offers significant potential to obtain hydrocarbons and economic benefits due to the mild conditions and high activity. Herein, the photodecarboxylation of hexanoic acid into alkanes using TiO2-supported monometallic Au or Pd and bimetallic Au-Pd catalysts is reported. It was found that bimetallic Au-Pd catalysts, featuring a core-shell structure evidenced by EDX-mapping and element line profile, show better photocatalytic performance, achieving 94.7% conversion of hexanoic acid and nearly 100% selectivity to pentane under UV-vis irradiation in the absence of H2 than the monometallic Au analogue. This remarkable enhancement in activity compared to its TiO2 supported monometallic Au or Pd analogues can be attributed to the synergistic effect between Au and Pd within the nanostructured Au(core)-Pd(shell) alloy for achieving more efficient charge-separation efficiency upon visible light excitation. This photocatalyst exhibits a wide scope converting multiple fatty acids into hydrocarbons. Moreover, it can even photocatalyze the conversion of raw bio-oils into alkanes directly. No obvious activity loss was observed during the reusability tests, demonstrating the good stability of the present catalyst. Density functional theory (DFT) calculations indicate that oxidation of carboxylates on TiO2 leads to alkyl radicals that become bound to metal nanoparticles. The superior catalytic performance of Au(core)-Pd(shell)/TiO2 is derived from the weaker adsorption for H on the alloy and the lower hydrogen evolution reaction overpotential. Our research can result in an efficient bio-oil upgrading, resulting in the synthesis of biofuels from biomass under mild conditions.

Topology and Excited State Multiplicity as Controlling Factors in the Carbazole-Photosensitized CPD Formation and Repair.

Photosensitized thymine<>thymine (Thy<>Thy) formation and repair can be mediated by carbazole (Cbz). The former occurs from the Cbz triplet excited state via energy transfer, while the latter takes place from the singlet excited state via electron transfer. Here, fundamental insight is provided into the role of the topology and excited state multiplicity, as factors governing the balance between both processes. This has been achieved upon designing and synthesizing different isomers of trifunctional systems containing one Cbz and two Thy units covalently linked to the rigid skeleton of the natural deoxycholic acid. The results shown here prove that the Cbz photosensitized dimerization is not counterbalanced by repair when the latter, instead of operating through-space, has to proceed through-bond.

Stereoselective, Ruthenium-Photocatalyzed Synthesis of 1,2-Diaminotruxinic Bis-amino Acids from 4-Arylidene-5(4H)-oxazolones.

The irradiation of (Z)-2-phenyl-4-aryliden-5(4H)-oxazolones 1 in deoxygenated CH2Cl2 at 25 °C with blue light (465 nm) in the presence of [Ru(bpy)3](BF4)2 (5% mole ratio) as a triplet photocatalyst promotes the [2+2] photocycloaddition of the C═C bonds of the 4-arylidene moiety, thus allowing the completely regio- and stereoselective formation of cyclobutane-bis(oxazolone)s 2 as single stereoisomers. Cyclobutanes 2 have been unambiguously characterized as the µ-isomers and contain two E-oxazolones coupled in an anti-head-to-head form. The use of continuous-flow techniques in microreactors allows the synthesis of cyclobutanes 2 in only 60 min, compared with the 24-48 h required in batch mode. Ring opening of the oxazolone heterocycle in 2 with a base affords the corresponding 1,2-diaminotruxinic bis-amino esters 3, which are also obtained selectively as µ-isomers. The ruthenium complex behaves as a triplet photocatalyst, generating the reactive excited state of the oxazolone via an energy-transfer process. This reactive excited state has been characterized as a triplet diradical 3(E/Z)-1* by laser flash photolysis (transient absorption spectroscopy). This technique also shows that this excited state is the same when starting from either (Z)- or (E)-oxazolones. Density functional theory calculations show that the first step of the [2+2] cycloaddition between 3(E/Z)-1* and (Z)-1 is formation of the C(H)-C(H) bond and that (Z) to (E) isomerization takes place at the 1,4-diradical thus formed.

Computational elucidation of the aging time effect on zeolite synthesis selectivity in the presence of water and diquaternary ammonium iodide.

An example of zeolite selectivity (MFI → MOR) driven by synthesis aging time has been studied. Using N,N,N',N'-tetramethyl-N,N'-dipropyl-ethylenediammonium diiodide (TMDP) as an organic structure-directing agent (OSDA), the zeolite phases obtained at 2 h (MFI 97%), 8 h (MFI 84%, MOR 16%) and 24 h (MFI 43%, MOR 57%) have been characterized by powder X-ray diffraction. The results suggest that at intermediate aging time, namely 8 h and 24 h, the dominant phase (MFI) is displaced by MOR. Different techniques (FT-IR, Raman, 13C MAS NMR, TGA/DTG and HC microanalysis) have been employed to verify the OSDA integrity and occlusion inside the zeolite micropores as well as to quantify the water and OSDA loading. The 1H MAS NMR of the as-made occluded zeolite was compared with the spectra of TMDP and the recovered OSDA from the sample by extraction with water. The comparison indicated that TMDP was not structurally intact, indicating the chemical transformation of TMDP to imidazolinium homologues through the Hofmann degradation process. Furthermore, careful acidic breakdown of the aluminosilicate shell, covered on the zeolite samples by hydrofluoric acid, revealed that the remaining OSDA had been partially degraded to lower molecular weight ammonium salt, confirmed by 1H NMR and mass spectrometry measurements. A computational study was performed by using a force field based methodology, including accurate loading of water and OSDA in the zeolite (MFI and MOR) unit cells. The results show an important contribution of the presence of water. The samples with larger aging time (8 h and 24 h) incorporate less water and show partial TMDP degradation, whilst at the shortest aging time (2 h), there is a larger water content and TMDP remains intact. The larger accessible volume of MFI justifies that this is the dominant phase at short aging times (large water content) since it can accommodate a larger number of water molecules than MOR. The OSDA partial degradation also plays a role. At longer aging times the partial OSDA decomposition has been considered in the models by including TMDP + Imidaz, which is more stabilized by MOR, whilst at shorter aging times the only OSDA present, TMDP, is better stabilized by MFI.

Thermal resistance effect on anomalous diffusion of molecules under confinement.

Diffusion is generally faster at higher temperatures. Here, a counterintuitive behavior is observed in that the movement of long-chain molecules slows as the temperature increases under confinement. This report confirms that this anomalous diffusion is caused by the "thermal resistance effect," in which the diffusion resistance of linear-chain molecules is equivalent to that with branched-chain configurations at high temperature. It then restrains the molecular transportation in the nanoscale channels, as further confirmed by zero length column experiments. This work enriches our understanding of the anomalous diffusion family and provides fundamental insights into the mechanism inside confined systems.

Synergistically enhance confined diffusion by continuum intersecting channels in zeolites.

In separation and catalysis applications, adsorption and diffusion are normally considered mutually exclusive. That is, rapid diffusion is generally accompanied by weak adsorption and vice versa. In this work, we analyze the anomalous loading-dependent mechanism of p-xylene diffusion in a newly developed zeolite called SCM-15. The obtained results demonstrate that the unique system of "continuum intersecting channels" (i.e., channels made of fused cavities) plays a key role in the diffusion process for the molecule-selective pathways. At low pressure, the presence of strong adsorption sites and intersections that provide space for molecule rotation facilitates the diffusion of p-xylene along the Z direction. Upon increasing the molecular uptake, the adsorbates move faster along the X direction because of the effect of continuum intersections in reducing the diffusion barriers and thus maintaining the large diffusion coefficient of the diffusing compound. This mechanism synergistically improves the diffusion in zeolites with continuum intersecting channels.

Control of zeolite microenvironment for propene synthesis from methanol.

Optimising the balance between propene selectivity, propene/ethene ratio and catalytic stability and unravelling the explicit mechanism on formation of the first carbon-carbon bond are challenging goals of great importance in state-of-the-art methanol-to-olefin (MTO) research. We report a strategy to finely control the nature of active sites within the pores of commercial MFI-zeolites by incorporating tantalum(V) and aluminium(III) centres into the framework. The resultant TaAlS-1 zeolite exhibits simultaneously remarkable propene selectivity (51%), propene/ethene ratio (8.3) and catalytic stability (>50 h) at full methanol conversion. In situ synchrotron X-ray powder diffraction, X-ray absorption spectroscopy and inelastic neutron scattering coupled with DFT calculations reveal that the first carbon-carbon bond is formed between an activated methanol molecule and a trimethyloxonium intermediate. The unprecedented cooperativity between tantalum(V) and Brønsted acid sites creates an optimal microenvironment for efficient conversion of methanol and thus greatly promotes the application of zeolites in the sustainable manufacturing of light olefins.

Sequential pore wall functionalization in covalent organic frameworks and application to stable camptothecin delivery systems.

Post-synthetic modification of covalent organic frameworks (COFs) is strongly demanded in order to provide additional functionalities to their structures. However, the introduction of functional groups during the synthesis of two dimensional COFs (2D COFs) is highly discouraged, as they can interfere with the π-π stacking forces, compromising framework integrity. Here, we show that direct incorporation of nucleophyllic groups (e.g., primary amines) on pore wall during the synthesis of a 2D-COF (COF-5) is possible by sequential substitution of original monomers. Subsequent bonding of the antitumor drug camptothecin results in a stable hydrophobic drug delivery system. Water adsorption isotherms modelling indicates that the insertion of CPT ligand in the framework promotes a hydrophobic effect that protects a region of COF chain from boronate ester hydrolysis and resulting degradation, which is also proven by stability testing in physiological conditions. Furthermore, this hydrophobic nature favors cell internalization kinetics by promoting interactions with the lipophilic cell membrane. To the best of our knowledge, this is the first case of a stable drug delivery system based on covalently conjugated COFs.

Computational Screening of Structure-Directing Agents for the Synthesis of Pure Silica ITE Zeolite.

"Shape" was the first criterion claimed to explain the specificity between organic structure-directing agents (OSDAs) and zeolite micropores. With the advent of computational chemistry methods applied to study the effectiveness of SDA-zeolite combinations, "energy" (mainly van der Waals) became the most commonly invoked concept to explain the zeolite phase selectivity. The lower the energy, the better the SDA. In this study, we rescue the concept of shape, and we combine it with the concept of energy within the frame of a SDA screening approach to identify new SDAs for the synthesis of cage-based ITE zeolite. Once we identify an appropriate shape fingerprint, filtering through the SDA database can be done quickly and accurately. With the shape selection, an automated Monte Carlo software allows us to assess the suitability using the force-field-calculated zeo-SDA energy. The computational approach can be promptly applied to other cage-based zeolites.

Identification of New Templates for the Synthesis of BEA, BEC, and ISV Zeolites Using Molecular Topology and Monte Carlo Techniques.

The presence of organic structure directing agents (templates) in the synthesis of zeolites allows the synthesis to be directed, in many cases, toward structures in which there is a large stabilization between the template and the zeolite micropore due to dispersion interactions. Although other factors are also important (temperature, pH, Si/Al ratio, etc.), systems with strong zeolite-template interactions are good candidates for an application of new computational algorithms, for instance those based in molecular topology (MT), that can be used in combination with large databases of organic molecules. Computational design of new templates allows the synthesis of existing and new zeolites to be expanded and refined. Three zeolites with similar 3-D large pore systems, BEA, BEC, and ISV, were selected with the aim of finding new templates for their selective syntheses. Using a training set of active and inactive templates (obtained from the literature) for the synthesis of target zeolites, it was possible to select chemical descriptors related to activity, meaning a good candidate template. With a discriminant function defined upon MT, the screening through a database of organic molecules led to a small subset (preselection) of candidate templates for the synthesis of BEA, BEC, and ISV. As far as we know, this is the first time that topological/topochemical descriptors, which do not consider 3-D information on the molecules, have been used to predict the activity of zeolite structure directing agents (SDAs). Following the prediction of SDAs using MT, an automated approach of sequential template filling of micropores based on a combination of Monte Carlo and lattice energy minimization was applied for all the candidate templates in the three zeolites. Two results can be obtained from this: an evaluation of the quality of the molecular topology QSAR models leading to the preselection of templates, and a final selection of candidate templates for the selective synthesis of BEA, BEC, and ISV. Regarding the latter, a good template will be that which maximizes the zeolite-template dispersion interactions with one, and only one, of the three zeolites. The presented methodology can be used to find alternative (maybe cheaper or perhaps more selective) templates than those already known.

Light Olefin Diffusion during the MTO Process on H-SAPO-34: A Complex Interplay of Molecular Factors.

The methanol-to-olefins process over H-SAPO-34 is characterized by its high shape selectivity toward light olefins. The catalyst is a supramolecular system consisting of nanometer-sized inorganic cages, decorated by Brønsted acid sites, in which organic compounds, mostly methylated benzene species, are trapped. These hydrocarbon pool species are essential to catalyze the methanol conversion but may also clog the pores. As such, diffusion of ethene and propene plays an essential role in determining the ultimate product selectivity. Enhanced sampling molecular dynamics simulations based on either force fields or density functional theory are used to determine how molecular factors influence the diffusion of light olefins through the 8-ring windows of H-SAPO-34. Our simulations show that diffusion through the 8-ring in general is a hindered process, corresponding to a hopping event of the diffusing molecule between neighboring cages. The loading of different methanol, alkene, and aromatic species in the cages may substantially slow down or facilitate the diffusion process. The presence of Brønsted acid sites in the 8-ring enhances the diffusion process due to the formation of a favorable π-complex host-guest interaction. Aromatic hydrocarbon pool species severely hinder the diffusion and their spatial distribution in the zeolite crystal may have a significant effect on the product selectivity. Herein, we unveil how molecular factors influence the diffusion of light olefins in a complex environment with confined hydrocarbon pool species, high olefin loadings, and the presence of acid sites by means of enhanced molecular dynamics simulations under operating conditions.

Dynamic Studies on Kinetic H2 /D2 Quantum Sieving in a Narrow Pore Metal-Organic Framework Grown on a Sensor Chip.

The separation of deuterium from hydrogen still remains a challenging and industrially relevant task. Compared to traditional cryogenic methods for separation, based on different boiling points of H2 and D2 , the use of ultramicroporous materials offers a more efficient alternative method. Due to their rigid structures, permanently high porosity, tunable pore sizes and adjustable internal surface properties, metal-organic frameworks (MOFs), a class of porous materials built through the coordination between organic linkers and metal ions/clusters, are more suitable for this approach than zeolites or carbon-based materials. Herein, dynamic gas flow studies on H2 /D2 quantum sieving in MFU-4, a metal-organic framework with ultra-narrow pores of 2.5 Å, are presented. A specially designed sensor with a very fast response based on surface acoustic waves is used. On-chip measurements of diffusion rates in the temperature range 27-207 K reveal a quantum sieving effect, with D2 diffusing faster than H2 below 64 K and the opposite selectivity above this temperature. The experimental results obtained are confirmed by molecular dynamic simulation regarding quantum sieving of H2 and D2 on MOFs for which a flexible framework approach was used for the first time.

Generation of the Thymine Triplet State by Through-Bond Energy Transfer.

Benzophenone (BP) and drugs containing the BP chromophore, such as the non-steroidal anti-inflammatory drug ketoprofen, have been widely reported as DNA photosensitizers through triplet-triplet energy transfer (TTET). In the present work, a direct spectroscopic fingerprint for the formation of the thymine triplet (3 Thy*) by through-bond (TB) TTET from 3 BP* has been uncovered. This has been achieved in two new systems that have been designed and synthesized with one BP and one thymine (Thy) covalently linked to the two ends of the rigid skeleton of the natural bile acids cholic and lithocholic acid. The results shown here prove that it is possible to achieve triplet energy transfer to a Thy unit even when the photosensitizer is at a long (nonbonding) distance.